General features, Easicool™ precision air conditioning – Airedale EasiCool 6kW 64kW User Manual

Page 29

Advertising
background image

EasiCool™

Precision Air Conditioning

General Features

Open & Enclosed Floorstand

Open or enclosed floorstands are available, complete with adjustable feet and floor tile lip. Enclosed floorstands
incorporate an air turning vane. Height of the floorstand; please specify at order.

Discharge Air Configuration

Standard configuration is forward air discharge. Reverse air discharge is available, please specify at order.

Ceiling Duct Extension

Straight and ‘L’ shaped duct extensions up to a height of 1350 mm constructed and finished to match the unit are
available.

For extensions greater than 1350 mm, please contact Airedale.

Height; please specify at order.

Services Side Access Gland Plate

As standard services can be routed through the gland plate in the base of the units. A gland plate can be optionally
located to the lower left hand side face of the unit, if required.

Plain Doors - No Display Keypad

Networking is a standard option of the AireTronix microprocessor; refer to Controls, for full details. To reduce costs, the
“slave” units can be supplied with plain doors (no display keypad), in all door types, please specify at order.

Threaded Water Pipe Connection

As an alternative to brazed water pipe connections, BSP brass male taper threaded connections can be factory fitted.

Sterling Board LAT (Wooden Case) Packing

Units shall be supplied complete with additional LAT corner protection and cross braces to afford extra transit protection.
Sterling board heat treated man made material shall be used (including pallet) to comply with phytosanity import
regulations (please contact Airedale for this option).

System Configuration

Downflow

Upflow

X Type

WX Type

X Type

WX Type

Secure Door Locks

Return Air Grille

Cold Water Condensate Pump

Open Floorstand

Enclosed Floorstand

Ceiling Duct Extension

Standard Feature

Optional Feature

Not Available

29

EasiCool Technical Manual 7535776 V1.1.0_04_2013

Introduction

Advertising