Dwyer PSX2 - Manual (Page 104)

95
(1) Select “ANALOG INPUT/OUTPUT” on the SYS-
TEM screen.
Press the
ENT
key to display the ANALOG INPUT/
OUTPUT screen.
10.3.2 “ANALOG INPUT/OUTPUT”: when performing analog input/output
and calibration
This function allows you to set the analog input/output and perform input/output calibration.
AI ch2
AO
AI ch1
Red
(+)
Red
(+)
Black
( í)
Black
( í)
4 to 20mA AO
(Output)
Indicator,
recorder,
regulator, etc.
(Note) The connector should
be connected to AI/AO.
Analog output: 4 to 20mA DC 1 point “Load resistance under 600 Ÿ”
Analog input: 4 to 20mA DC 1 point “Input resistance 200 Ÿ”
4 to 20mA DC 1 point “Input resistance 200 Ÿ” or
1 to 5V DC 1 point
Analog input/output cord (page 20)
− ＋
AI
(Input)
Bulletin F-9-PUX2