2 measured data file, 2 measured data fi le, 1) confi guration data fi le – Dwyer PSX2 User Manual
Page 186: Bulletin f-9-pux2
177
16.5.2 Measured data fi le
(1) Confi guration data fi le
A fi le is roughly confi gured of three sections.
• Section [START] A fi le is generated at start, and this section is created at that time.
Item
Contents
PRODUCT
Product name, fi xed
VERSION
File format version number (1.0.0, fi xed)
TIME
Logger start date and hour
CYCLE
Logger acquisition period (sec)
• Section [DATAx] Added at the time of generation of target data fi le.
Item
Contents
FILE
File name of logger data
INDEXx
Offset (bytes) to (date and hour) data in the logger data is added sequentially
beginning from 1 as indicated below.
(offset, total number of data in offset, date/hour of offset)
TIME
Logger data exit date and hour
COUNT
Total number of data in target data fi le
STATUS
Exit status
NORMAL:
Normal exit caused by termination of acquisition period
STOP:
Normal exit caused by stop operation during acquisition
POWER OFF: Interruption caused by OFF button during acquisition
BATTERY LOW: Interruption caused by battery capacity drop during acquisi-
tion
FIFO EMPTY:
No vacancy in measurement FIFO
ABNORMAL:
Stop caused by system error during acquisition
SIZE
Byte size of target data fi le
SUM
Total number of data up to target data fi le
Bulletin F-9-PUX2