Dwyer PSX2 - Manual (Page 185)

176
16.5 File contents of SD memory card
16.5.1 Types of measured data to be logged
Measured data to be logged is of 14 types indicated below.
Table 16-1 Data types
Kind Name Sign
Maximum number
of places of integer
section
Number of places
of decimal
Unit
VELOCITY VELOCITY Yes 3 places 3 places m/s
FLOW RATE FLOW RATE Yes 12 places 4 places Flow unit
FLOW RATE (%) FLOW RATE (%) Yes 3 places 3 places %
+TOTALIZER +TOTAL (ACTUAL) No 10 places 3 places Total unit
íTOTALIZER íTOTAL (ACTUAL) No 10 places 3 places Total unit
AI CHANNEL 1
Analog input
channel 1
Yes 10 places 3 places —
AI CHANNEL 2
Analog input
channel 2
Yes 10 places 3 places —
FEEDING TEMP.
SENDING
TEMPERATURE
Yes 3 places 3 places
Temperature
unit
RETURNING
TEMP. RETURN
TEMPERATURE
Yes 3 places 3 places
Temperature
unit
DIFFERENCE
TEMP. DIFFERENCE OF
TEMPERATURE
Yes 3 places 3 places
Temperature
unit
THERMAL FLOW HEAT FLUX Yes 10 places 3 places
Thermal fl ow
unit
THERMAL FLOW (%) HEAT FLUX (%) Yes 3 places 3 places %
+TOTAL
(THERMAL) +HEAT TOTAL
(ACTUAL)
No 10 places 3 places
Total unit
(Thermal)
íTOTAL
(THERMAL) íHEAT TOTAL
(ACTUAL)
No 10 places 3 places
Total unit
(Thermal)
In case heat mode is “NOT USED”, it is invalid even if feeding temperature and subsequent
have been selected.
If the system unit was changed after logger start, logging is performed in the unit at the time of
start. The changed unit becomes valid after the logger is stopped.
Bulletin F-9-PUX2