Document Outline

• Chapter 1 - Preliminary Information
• 1-1 Introduction
• 1-1.1 Systems Covered by this Manual
• 1-1.2 Terminology used in this Manual
• 1-1.3 Scope of this Technical Manual
• 1-2 System Requirements
• 1-2.1 Minimum Computer Requirements
• 1-3 Special Considerations
• 1-4 Advanced Site Considerations
• 1-5 Installation Plans
• 1-5.1 Required Software on Site Computer
• Chapter 2 - Installation and Configuration of eServer Software
• 2-1 Overview
• 2-2 Pre-installation Tasks
• 2-2.1 Overview
• 2-2.2 Remote Access, Ports and Security Information
• 2-2.3 Setup of a Dedicated Site Computer with ADSL Connection
• 2-3 Installation of eServer Software
• 2-3.1 Overview
• 2-2.4 Domain Name System (DNS) Setup
• 2-3.2 Installation Steps
• 2-4 Installation of ATOM Reports Component
• 2-4.1 Overview
• 2-4.2 Installation Steps
• 2-5 Security Access to the c:\MyWebPages Directory
• 2-5.1 Overview
• 2-5.2 Create Special User "Everyone" for c:\MyWebPages
• 2-5.3 Configure Security Settings for Special User "Everyone"
• Chapter 3 - Configuring Internet Information Services (IIS)
• 3-1 Overview
• 3-2 Installing Internet Information Services (IIS)
• 3-2.1 Overview
• 3-2.2 Installing IIS on Windows Server 2008 R2
• 3-2.3 Installing IIS on Windows 7
• 3-2.4 Installing IIS on Windows Vista
• 3-2.5 Installing IIS on Windows XP
• 3-3 Launching Internet Information Services (IIS)
• 3-3.1 Overview
• 3-3.2 Launching IIS on Windows Server 2008 R2
• 3-3.3 Launching IIS on Windows 7
• 3-3.4 Launching IIS on Windows Vista
• 3-3.5 Launching IIS on Windows XP
• 3-4 Configuring Internet Information Services (IIS)
• 3-4.1 Overview
• 3-4.2 Configure IIS on Windows Server 2008 R2, 7 and Vista
• 3-4.3 Configure IIS on Windows XP
• Chapter 4 - Configuring eServer Communications
• 4-1 Overview
• 4-2 Configure eServer Project Settings
• 4-2.1 Overview
• 4-2.2 Launch Project for Configuration
• 4-2.3 Set Project Properties for the Access Database
• 4-2.4 Set Project Properties for the SQL Database
• 4-2.5 Set iComm Connection Properties
• 4-2.6 Set iComm Connection Properties
• 4-2.7 Save Project Settings
• 4-3 Setup SQL Server Communications
• 4-3.1 Overview
• 4-3.2 Default SQL Server 2008 R2 Express Edition Settings
• 4-4 Setup eServer Security and Access Control
• 4-4.1 Overview
• 4-4.2 Configure eServer Security
• 4-4.3 Enabling eServer Access Control
• 4-4.4 Test eServer Connectivity
• 4-5 Setup of eServer Client Computer
• 4-5.1 Overview
• 4-5.2 Connection Steps
• 4-5.3 Setup Crystal Reports Software on eServer Client Computer
• Chapter 5 - General Troubleshooting Tips
• 5-1 Introduction
• 5-1.1 Download and Install Unsigned ActiveX Controls
• 5-1.2 Bypass Proxy Server Settings
• 5-2 Internet Explorer Compatibility with eServer
• 5-2.1 Internet Explorer 10
• 5-2.2 Internet Explorer 11
• Appendix A - Upgrade Guide for eServer 1.20E or Greater
• A-1 Overview
• A-2 Updating DNS Name or Static IP Address Settings
• A-2.1 Overview
• A-2.2 Updating eServer / Magellan Project Settings
• A-3 Updating Internet Information Services (IIS) Settings
• A-3.1 Overview
• A-3.2 Updating IIS Settings on Windows Server 2008 R2, 7 and Vista
• A-3.3 Updating IIS Settings on Windows XP
• Customer Assistance
• Innotech Support
• Figures
  • Example of eServer Setup Network Topology
  • Example of Forwarding Requests for Ports to Static Ip Addresses
  • Commence Installation of the eServer Software
  • eServer Software Licence Agreement
  • eServer Software Customer Information
  • eServer Software Installation Location
  • eServer Software File Installation
  • ATOM Reports Component Installation Preparation
  • Commence ATOM Reports Component Installation
  • Select the Specific ATOM Reports Components to Install
  • Edit Security Groups for c:\MyWebPages
  • Add the new Security Group "Everyone"
  • Enter the new Security Group "Everyone"
  • Edit properties for Security Group "Everyone"
  • Select Full Control for Security Group "Everyone"
  • Open Advanced Security Settings for Security Group "Everyone"
  • Edit Advanced Security Settings for Security Group "Everyone"
  • Set Advanced Security Settings for Security Group "Everyone"
  • Confirm Advanced Security Settings for Security Group "Everyone"
  • Initial Configuration Tasks on Windows Server 2008 R2
  • Server Manager Window on Windows Server 2008 R2
  • Confirm that initial setup of your server computer is correct
  • Select Web Server (IIS) from available Server Roles
  • Read the Introduction to Web Server (IIS)
  • Setup IIS options for a Windows Server 2008 R2 computer
  • Confirm IIS installation options for a Windows Server 2008 R2 computer
  • IIS installation in progress on a Windows Server 2008 R2 computer
  • Review IIS installation results on Windows Server 2008 R2
  • Validate the role Web Server (IIS) in the Server Manager window
  • Opening Control Panel on Windows 7
  • Open Programs and Features from the Control Panel on Windows 7
  • Selecting "Turn Windows Features On or Off" on Windows 7
  • Setup IIS Features on Windows 7
  • Opening Control Panel on Windows Vista
  • Opening Programs and Features on Windows Vista
  • Opening Windows Features Menu on Windows Vista
  • Setup IIS Features on Windows Vista
  • Opening "Add and Remove Programs" from the Control Panel in Windows XP
  • Opening "Add/Remove Windows Components" on Windows XP
  • Check if IIS is installed on Windows XP
  • Installing IIS from the Windows XP Installation Disk
  • Adding IIS components on Windows XP
  • Launch the IIS Manager on Windows Server 2008 R2
  • Home screen of the IIS Manager on Windows Server 2008 R2
  • Opening Control Panel in Windows 7
  • Open Administrative Tools on Windows 7
  • Launch IIS on Windows 7
  • Opening Control Panel in Windows Vista
  • Opening Administrative Tools on Windows Vista
  • Launch IIS on Windows Server
  • Launch Internet Information Services on Windows XP
  • Open Basic Settings for Default Web Site
  • Configure Physical Path for c:\MyWebPages
  • Set Authentication properties for Default Web Site
  • Edit Anonymous Authentication properties
  • Set Anonymous user identity
  • Set IUSR credentials
  • Save and Exit Anonymous Authentication Setup
  • Open Default Document Menu for Default Website
  • Select Default Document index.htm
  • Confirm Selection of Default Document index.htm
  • Locate the Default Document index.htm
  • Open MIME Types for Default Web Site
  • MIME Types Screen
  • Add the new MIME Type for the Default Web Site
  • Open Default Web Site Properties on Windows XP
  • Configure Default Web Site Identification Properties on Windows XP
  • Configure Directory Security for Default Web Site on Windows XP
  • Authentication Methods for Default Web Site with eServer on a Domain
  • Open locations to Browse for Default Web Site computer
  • Select Location of Computer for Authentication Details
  • Enable IIS Password Control with Windows XP on a Local Domain
  • Enable Windows XP IIS Password Control on a Local Domain
  • Authentication Methods for Default Web Site on a Standalone Computer
  • Search for user on Windows XP standalone computer
  • Select Authentication Name for Default Web Site on Windows XP
  • Enable IIS password control with Windows XP on a standalone computer
  • Set Home Directory on Windows XP
  • Set Documents for Default Web Site on Windows XP
  • Add Document index.htm for Default Web Site on Windows XP
  • Apply Document Settings for Default Web Site on Windows XP
  • Configure MIME Types on Windows XP
  • Add new MIME Type on Windows XP
  • New MIME Type Window
  • Validate two new MIME Types on Windows XP
  • Ensure that the Default Web Site is running on Windows XP
  • Open the Magellan project
  • Open Project Properties to enter the Access database settings
  • Selecting Access database in Magellan Project Properties
  • Selecting Access database Type in Magellan Project Properties
  • Open Magellan Project Properties
  • Selecting SQL database in Magellan Project Properties
  • eServer and Chronicle Server Settings for the SQL Server
  • Open iComm Server Properties in the Magellan project
  • Point Properties
  • Check the eServer and Chronicle Server settings for the iComm Server
  • Example Device Properties for Connection 1, Device 1
  • Example Device Properties for Connection 2, Device 1
  • Validate your Device Settings with the iComm Server
  • Save updated Magellan project settings
  • Create new Magellan package
  • Load the Magellan project into eServer
  • Open eServer Project Preferences
  • Configure eServer Connection Security
  • Enable eServer Access Control
  • Entering Connection Authentication Details
  • Launch Internet Explorer and Connect to eServer Computer
  • Install Magellan ActiveX Control
  • Internet Explorer Information Bar when Installing Magellan ActiveX Control
  • Internet Explorer Security Warning when Installing eServer Native Client
  • Internet Explorer Information Bar when Running Magellan ActiveX Control
  • Launch the Magellan ActiveX Control
  • Confirm eServer connection
  • Index.htm file contents
  • Launch the Crystal Reports Web Components installer
  • Confirm Installation Location for Crystal Reports Web Components
  • Commence Installation of Crystal Reports Web Components
  • Crystal Reports Web Components Commencing Installation
  • Crystal Reports Web Components Continuing Installation
  • Crystal Reports Web Components Installation Complete
  • Message Advising that Crystal Reports Web Components are needed
  • Select to Download the Crystal Reports Web Component
  • Downloading the Crystal Reports Web Component
  • Local Intranet Settings in Internet Explorer
  • Configure IE to Download Unsigned ActiveX Controls
  • Configure LAN Settings in Internet Explorer
  • Bypass Proxy Server Settings in Internet Explorer
  • Enter Proxy Server Exceptions in Internet Explorer
  • Internet Explorer 10 "Broken Page" icon
  • Internet Explorer 11 "Cog" Settings Menu
  • Internet Explorer 11 Compatibility View Settings
  • Open iComm Server Properties
  • Set iComm Server Properties
  • Open Default Document Menu for Default Web Site
  • Locate the Default Document index.htm
  • Accept List Change for the Default Document index.htm
  • Confirm the Default Document index.htm is First
  • Open MIME Types for Default Web Site
  • Add a new MIME Type for the Default Web Site
  • Add the First New MIME Type for the Default Web Site
  • Open Default Web Site Properties on Windows XP
  • Set Documents for Default Web Site on Windows XP
  • Add Document index.htm for Default Web Site on Windows XP
  • Apply Document Settings for Default Web Site on Windows XP
  • Configure MIME Types on Windows XP
  • Mime File Types Window
  • Add the new MIME Type on Windows XP
  • Validate two new MIME Types on Windows XP
  • Ensure that the Default Web Site is running on Windows XP
• Tables
  • Document Chapters
  • Required Ports for an Innotech System
  • Default SQL Server 2008 R2 Express Edition connection settings