Sterlco S Series Central Chilling Stations - Manual (Page 22)

Page 22 of 86 SSC Series Central Chilling Stations
To Process
The chilled water supply outlet leading to the process being
controlled.
From Process
The chilled water return for water returning back to the chiller
from the process to be cooled and recirculated.
3-5 Making Tank Piping Connections
If you have purchased the SSC Series central chilling station with
the integral pump tank, please proceed with this section.
Return
Bring the chilled water returning from the process to the pump
tank warm
From Process side. This line is sized according to the
flow rate from the process to the pump tank. See Section 3-3 on
Page 21 for more information on piping considerations.
Important!
Do not use the SSC Series unit to support piping.
Makeup
Connect a city water source to maintain water level in the pump
tank.
Overflow
Connect the OVERFLOW outlet to an approved, trapped drain to
permit excess water in the pump tank to overflow to the drain. The
overflow line is sized according to the size of the pump tank.
To Drain
Connect to a 1½” line (approx. 63 mm) leading to an approved,
trapped drain. You can drain the pump tank if necessary.