Sterlco S Series Central Chilling Stations - Manual (Page 44)

Page 44 of 86 SSC Series Central Chilling Stations
Figure 6
SSC Series Standard Control Panel
7-2 Using the SSC Series Standard Touchscreen
Interface
The SSC Series Standard touchscreen interface is the “manager” of
your SSC Series central chilling station. The screen contains screen
buttons you can press to control system operation.
For example, if you need to resolve an alarm condition, press the
or buttons on the right side of the screen to highlight
“ACTIVE ALARM LIST”. The screen will tell you what alarm is
active and you may clear the alarm by touching the F1 button
located to the lower left of the terminal.
To return to the Main Menu screen at this point, press the F4
button of the terminal, located in the lower right corner. The Main
Menu screen then displays.
Some screens let you directly control the operation of the chilling
station, while others are for information purposes and are “display-
only” screens. This chapter distinguishes between operation and
display screens.