Sterlco S Series Central Chilling Stations - Manual (Page 54)

Page 54 of 86 SSC Series Central Chilling Stations
To acknowledge the alarm, press F1 to clear the alarm. It will then
appear in the alarm history screen. Except for High and Low
Water Temperature, and Low Refrigerant Pressure, these alarms
are considered fatal and maintenance must be preformed in order
to allow the chiller to fully run. Should a compressor or pump turn
off from an alarm condition, the remaining will shut down and
display FAULT in the status screen for the device.
Once a device has gone offline you will need to contact a licensed
professional (electrician or refrigeration sevice company) to bring
the device back online.
!
CAUTION
Never attempt to service a unit until a qualified
electrician has opened and locked out the main
disconnect using OSHA 1910.147 standards.
All electrical connections must be done by a qualified
electrician.
!
WARNING
Disconnect all power to the unit, let the unit
cool down, and turn off the water prior to any
servicing.
Failure to do so can result in SERIOUS INJURY
OR DEATH!