Sterlco S Series Central Chilling Stations - Manual (Page 61)

SSC Series Central Chilling Stations Page 61 of 86
Figure 9
Chiller Status Screen
The Chiller Status screen shows the status for compressors within
the system. Only compressors that are included in the system will
be shown on this screen. Compressors will display one of the
following states:
1. OFFLINE – This indicates that the compressor has been turned
off in the compressor enable/disable screen. The compressor
will not be called to operate until it has been re-enabled. The
color code for this indication is black.
2. READY – Indicates that the compressor is enabled and ready
to run. However, the current loading does not require the
compressor to be running. This compressor will be
automatically started when needed. The color code for this
indication is yellow.
3. RUNNING – Compressor is currently running. The color code
for this indication is green.
4. FAULT – A safety on the compressor indicates a fault
condition and the compressor has been deactivated. Once the