Sterlco S Series Central Chilling Stations - Manual (Page 45)

SSC Series Central Chilling Stations Page 45 of 86
7-3 Getting Started on the SSC Series Standard
Touchscreen Interface
To start the SSC Series Standard touchscreen interface:
„ Push the
ON/OFF button on the cabinet.
The SSC Series control panel energizes and the System On
indicator turns on.
The Main Menu screen displays:
Main Menu Screen
The Main Menu screen lets you gain access to:
• “COMPRESSOR STATUS” contains the compressor status
display screen
• If the chiller was configured to operate the chilled water pump
tank, the “PROC PUMP STATUS” is displayed. This screen
contains the process pump status.
• “RECIRC PUMP STATUS” contains the recirculation pump
status if the chiller was configured to operate the chilled water
pump tank.
• “ACTIVE ALARM LIST” shows all of the active alarms.
Those alarms which are currently preventing the chiller from
functioning, if fatal alarm, or those that show a condition which
needs to be looked at in a short period of time.
• “ALARM HISTORY” contains the last twenty-five (25)
alarms that were activated.