Sterlco S Series Central Chilling Stations - Manual (Page 7)

SSC Series Central Chilling Stations Page 7 of 86
1 General Information
1-1 Introduction
Sterling SSC Series central water chilling stations are available in
water-cooled and remote air-cooled designs. They differ only in
the condensing media used. The SSC Series units are configured
with two independent circuits using multiple compressors for each
circuit. This manual lists information for these units.
SSC Series chilling stations may be configured with stainless steel
pump tanks for use as reservoirs for chilled water processes. These
dual-well models hold hot and cold water before and after it is
pumped through the chiller. Tanks have recirculation pump(s) to
send return water to the chiller and process pump(s) to pump
cooled water directly to process. Standby pumps may be utilized to
distribute pump service or to allow uninterrupted chiller operation
during pump maintenance.
Properly installed, operated, and maintained SSC Series chilling
stations provide many years of reliable operation. To get the most
satisfaction from your new chiller, read and follow the
instructions in this manual.
1-2 Necessary Documents
The following documents are necessary for the operation,
installation, and maintenance of Sterling SSC Series central
chillers. Additional copies are available from Sterling.
Familiarize the appropriate personnel with these documents:
; This manual.
; The schematic and connection diagram in the control
enclosure.
; Operation and installation manuals for accessories and options
selected by the customer.
; The Customer Parts List included in the information packet.