Sterlco S Series Central Chilling Stations - Manual (Page 55)

SSC Series Central Chilling Stations Page 55 of 86
7-7 Viewing and Setting System Temperatures
To view the actual process temperature select any of the status
screens from the main menu. The process temperature is located
on the bottom of the screen.
For example, the compressor status displays:
Compressor Status Screen
Note: If you have a metric version of the SSC Series controller, the screens display in converted
metric values.
Setting System Temperatures
The chiller setpoints are set through the configuration menu.
Starting from the Main Menu:
„ Press the
or buttons to highlight
“CONFIGURATION MENU”
„ Press
↵
„ Highlight “CW TEMP SETPOINT”, “CW TEMP HIGH
LIMIT”, or “CW TEMP LOW LIMIT”
„ Press
↵
„ While on the parameter screen, simply press the F1 button to
make the parameter change. A numeric entry screen will
appear. Use the and buttons to select the digit, and
the and buttons to increase and decrease that digit.