Getting started – Brother MFC-490CW User Manual

Page 106

Advertising
background image

Chapter 12

90

Getting started

12

Firmly put a memory card or USB Flash
memory drive into the proper slot.

1 USB Flash memory drive

2 CompactFlash

®

3 SD, SDHC

4 Memory Stick

®

, Memory Stick Pro™

5 xD-Picture Card™

CAUTION

The USB direct interface supports only a
USB Flash memory drive, a PictBridge
compatible camera, or a digital camera that
uses the USB mass storage standard. Any
other USB devices are not supported.

Photo Capture key lights:

„

Photo Capture light is on, the memory
card or USB Flash memory drive is
properly inserted.

„

Photo Capture light is off, the memory
card or USB Flash memory drive is not
properly inserted.

„

Photo Capture light is blinking, memory
card or USB Flash memory drive is being
read or written to.

CAUTION

DO NOT unplug the power cord or remove
the media from the media drive (slot) or
USB direct interface while the machine is
reading or writing to the media (the
Photo Capture key is blinking). You will
lose your data or damage the card.

The machine can only read one memory card
or USB Flash memory drive at a time so do
not put more than one device in the machine
at a time.

1

2

3

5

4

Advertising