Brother MFC-490CW - Manual (Page 48)

32
5
Entering Fax mode
5
When the machine is idle, the time appears
on the LCD. When you want to send a fax, or
change fax send or receive settings, press
the (Fax) key to illuminate it in blue.
The LCD shows:
Press a or b to scroll through the Fax key
options. Some functions are only available
when sending black & white faxes.
„ Fax Resolution (See page 36.)
„ Contrast (See page 36.)
„ Speed Dial (See page 64.)
„ Outgoing Call (See page 65.)
„ Caller ID hist. (See page 66.)
„ Broadcasting (See page 34.)
„ Delayed Fax (See page 37.)
„ Batch TX (See page 38.)
„ Real Time TX (See page 37.)
„ Polled TX (See page 76.)
„ Polling RX (See page 75.)
„ Overseas Mode (See page 37.)
„ Glass ScanSize (See page 33.)
„ Set New Default (See page 38.)
„ Factory Reset (See page 39.)
When the option you want is highlighted,
press OK.
Faxing from the ADF
5
a
Press (Fax).
b
Place the document face down in the
ADF. (See Using the ADF on page 20.)
c
Enter the fax number using the dial pad,
Speed Dial or Search.
(For details, see How to Dial
on page 64.)
d
Press Black Start or Color Start.
The machine starts scanning the
document.
Note
• To cancel, press Stop/Exit.
• If you send a black & white fax when the
memory is full it will be sent in real time.
Sending a Fax
5
Fax Resolution Standard
Auto Auto Contrast Contrast
FAX
Speed Dial Speed Dial
Outgoing Call Outgoing Call
Fax Press Start