Brother MFC-490CW - Manual (Page 54)

Chapter 5
38
Delayed Batch Transmission
(Black & White only)
5
Before sending the delayed faxes, your
machine will help you economize by sorting
all the faxes in the memory by destination and
scheduled time. All delayed faxes that are
scheduled to be sent at the same time to the
same fax number will be sent as one fax to
save transmission time.
a
Press (Fax).
b
Press a or b to choose Batch TX.
c
Press d or c to choose On.
Press OK.
d
Press Stop/Exit.
Checking and canceling
waiting jobs
5
You can check which jobs are still waiting in
the memory to be sent and cancel a job.
(If there are no jobs, the LCD shows
No Jobs Waiting.)
a
Press Menu.
b
Press a or b to choose Fax.
Press OK.
c
Press a or b to choose
Remaining Jobs.
Press OK.
Any waiting jobs appear on the LCD.
d
Press a or b to scroll through the jobs
and choose the job you want to cancel.
Press OK.
e
Do one of the following:
„ To cancel, press 1 to choose Yes.
If you want to cancel another job go
to step d.
„ To exit without canceling, press 2 to
choose No.
f
When you have finished, press
Stop/Exit.
Setting your changes as the
new default
5
You can save the fax settings for
Fax Resolution, Contrast,
Glass ScanSize and Real Time TX you
use most often by setting them as default.
These settings will stay until you change
them again.
a
Press (Fax).
b
Press a or b to choose your new setting
you want to change, and then press
d
or c to choose the new option.
Press OK.
Repeat this step for each setting you
want to change.
c
After changing the last setting, press
a
or b to choose Set New Default.
Press OK.
d
Press 1 to choose Yes.
e
Press Stop/Exit.