Brother MFC-490CW - Manual (Page 42)

Chapter 3
26
Beeper Volume
3
When the beeper is on, the machine will beep
when you press a key, make a mistake or
after you send or receive a fax.
You can choose a range of volume levels,
from High to Off.
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose Volume.
Press OK.
d
Press a or b to choose Beeper.
e
Press d or c to choose Low, Med, High
or Off.
Press OK.
f
Press Stop/Exit.
Speaker Volume
3
You can choose a range of speaker volume
levels, from High to Off.
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose Volume.
Press OK.
d
Press a or b to choose Speaker.
e
Press d or c to choose Low, Med, High
or Off.
Press OK.
f
Press Stop/Exit.
You can also adjust the speaker volume by
pressing Hook.
a
Press Hook.
b
Press a and
d
or c .
This setting will stay until you change it
again.
c
Press Hook.