Brother MFC-490CW - Manual (Page 92)

Chapter 10
76
e
Do one of the following:
„ Press a or b to choose Add Number
and enter the number using a dial
pad.
Press OK.
„ Press a or b to choose Speed Dial
and OK. Press a or b to choose
Alphabetical Order or
Numerical Order and OK. Press
a
or b to select a number and OK.
f
After you have entered all the fax
numbers by repeating steps e, press
a
or b to choose Complete.
Press OK.
g
Press Black Start.
The machine polls each number or
Group number in turn for a document.
Press Stop/Exit while the machine is dialing
to cancel the polling process.
To cancel all sequential polling receive jobs,
see Checking and canceling waiting jobs
on page 38.
Polled transmit
(Black & White only)
10
Polled transmit lets you set up your machine
to wait with a document so another fax
machine can call and retrieve it.
The document will be stored and can be
retrieved by any other fax machine until you
delete it from the memory. (See Checking
and canceling waiting jobs on page 38.)
Set up for polled transmit
10
a
Press (Fax).
b
Load your document.
c
Press a or b to choose Polled TX.
d
Press d or c to choose On (or Off).
Press OK.
e
Press a or b to choose any settings you
want to change.
Press OK.
After each setting is accepted, you can
continue to change more settings.
f
Press Black Start.
g
If you are using the scanner glass, the
LCD will prompt you to choose one of
the options.
„ Press 1 to send another page.
Go to h.
„ Press 2 or Black Start to send the
document.
h
Place the next page on the scanner
glass, press OK. Repeat g and h for
each additional page.
Your machine will automatically send
the fax.