Brother MFC-490CW - Manual (Page 168)

152
Checking the ink volume
B
Although an ink volume icon appears on the
LCD, you can use the Ink key to see a large
graph showing the ink that is left in each
cartridge.
a
Press Ink.
b
Press a or b to choose Ink Volume.
Press OK.
The LCD shows the ink volume.
c
Press Stop/Exit.
Note
You can check the ink volume from your
computer. (See Printing for Windows
®
or
Printing and Faxing for Macintosh
®
in the
Software User’s Guide on the CD-ROM.)
Machine Information
B
Checking the serial number
B
You can see the machine’s serial number on
the LCD.
a
Press Menu.
b
Press a or b to choose
Machine Info.
Press OK.
c
Press a or b to choose Serial No.
Press OK.
d
Press Stop/Exit.
Packing and shipping
the machine
B
When you transport the machine, use the
packing materials that came with your
machine. If you do not pack the machine
properly, any damage that may occur in
transit will not be covered by your warranty.
CAUTION
It is important to allow the machine to ‘park’
the print head after a print job. Listen
carefully to the machine before unplugging
it to make sure that all mechanical noise
has stopped. Not allowing the machine to
finish this parking process may lead to print
problems and possible damage to the print
head.
a
Open the ink cartridge cover.
b
Press the ink release lever to release
the ink cartridge and take out the ink
cartridges. (See Replacing the ink
cartridges on page 145.)
c
Install the green protective part and then
close the ink cartridge cover.