Brother MFC-490CW - Manual (Page 50)

Chapter 5
34
Broadcasting
(Black & White only)
5
Broadcasting is when the same fax message
is automatically sent to more than one fax
number. You can include Groups, Speed Dial
numbers and up to 50 manually dialed
numbers in the same broadcast.
After the broadcast is finished, a Broadcast
Report will be printed.
a
Press (Fax).
b
Load your document.
c
Press a or b to choose Broadcasting.
Press OK.
d
You can add numbers to the broadcast
in the following ways:
„ Press a or b to choose Add Number
and enter the number using a dial
pad.
Press OK.
„ Press a or b to choose Speed Dial
and OK. Press a or b to choose
Alphabetical Order or
Numerical Order and OK. Press
a
or b to select a number and OK.
e
After you have entered all the fax
numbers by repeating step d, press
a
or b to choose Complete.
Press OK.
f
Press Black Start.
Note
• If you have not used up any of the
numbers for Groups, you can broadcast
up to 250 different numbers.
• The available memory will vary depending
on the types of jobs in the memory and the
number of locations used for
broadcasting. If you broadcast to the
maximum numbers available, you will not
be able to use dual access and delayed
fax.
• If the memory is full, press Stop/Exit to
stop the job. If more than one page has
been scanned, press Black Start to send
the portion that is in the memory.