Brother MFC-490CW - Manual (Page 94)

78
11
How to copy
11
Entering Copy mode
11
When you want to make a copy, press
(Copy) to illuminate it in blue.
The LCD shows:
1 No. of Copies
You can enter the number of copies you want
by using the dial pad.
Press a or b to scroll through the Copy key
options.
„ Quality (See page 79.)
„ Enlarge/Reduce (See page 80.)
„ Paper Type (See page 82.)
„ Paper Size (See page 83.)
„ Brightness (See page 82.)
„ Contrast (See page 82.)
„ Stack/Sort (See page 82.)
„ Page Layout (See page 80.)
„ Book Copy (See page 83.)
„ Watermark Copy (See page 84.)
„ Set New Default (See page 85.)
„ Factory Reset (See page 86.)
When the option you want is highlighted,
press OK.
Note
• The default setting is Fax mode. You can
change the amount of time that the
machine stays in Copy mode after the last
copy operation. (See Mode Timer
on page 24.)
• Book Copy and Watermark Copy
features are supported by technology
from Reallusion, Inc.
Making a single copy
11
a
Press (Copy).
b
Load your document.
(See Loading documents on page 20.)
c
Press Black Start or Color Start.
Making multiple copies
11
You can make up to 99 copies.
a
Press (Copy).
b
Load your document.
(See Loading documents on page 20.)
c
Enter the number of copies you want.
d
Press Black Start or Color Start.
Note
To sort the copies, press a or b to choose
Stack/Sort. (See Sorting copies using
the ADF on page 82.)
Stop copying
11
To stop copying, press Stop/Exit.
Making copies
11
01 1
COPY Copy Press Start
Normal
100% 100% Enlarge/Reduce Enlarge/Reduce
Plain Paper Plain Paper Paper Paper Type ype
Ratio: Ratio:
Quality