Brother MFC-490CW - Manual (Page 115)

PhotoCapture Center
®
: Printing photos from a memory card or USB Flash memory drive
99
12
PhotoCapture Center
®
print settings
12
You can change the print settings temporarily for the next printing.
These settings are temporary, and the machine returns to its default settings 3 minutes after
printing, unless you have set the Mode Timer to 2 minutes or less. (See Mode Timer on page 24.)
Note
You can save the print settings you use most often by setting them as default. (See Setting
your changes as the new default on page 103.)
1 No. of prints
(For View Photo(s), Search by Date, Slide Show)
You can see the total number of photos that will be printed.
(For Print All Photos, Print Photos, Enhance Photos, Trimming)
You can see the number of copies of each photo that will be printed.
(For DPOF printing) This does not appear.
Menu Selections Options 1 Options 2 Page
Print Quality
(Does not appear for
DPOF printing)
Normal/Photo — 100
Paper Type Plain Paper/Inkjet Paper/
Brother BP71/Other Glossy
— 100
Paper Size 4"x 6"/5"x 7"/Letter/ A4 (When A4 or Letter is chosen)
3"x 4"/3.5"x 5"/
4"x 6"/
5"x 7"/
6"x 8"/Max. Size
100
Brightness
(Does not appear
when
Enhance Photos is
chosen.)
— 101
Contrast
(Does not appear
when
Enhance Photos is
chosen.)
— 101
1
0001 0001
Print Setting Print Setting
Print Quality
PHOTO
Paper Paper Type ype
Paper Size Paper Size
Brightness Brightness
4"x6" 4"x6"
Print Size Print Size Max. Size Max. Size
Other Glossy Other Glossy
Photo
Print Press Start
0
Dark Light