Alliance Laundry Systems TMB795C - Manual (Page 52)

Steam Requirements
M414905 50 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Figure 23
Table 11
TMB2014N
NOTE: Refer to Table 11 for sizing of steam lines. Piping must also be sized accordingly for length of runs,
and number of elbows.
1 Supply 8 18 in. (457 mm) Drop
2 12 in. (305 mm) Riser 9 Solenoid Valve (Supplied with machine)
3 Shut-Off Valve 10 Steam Bonnet
4 Condensate Return Line from Supply Line 11 Flexible Line
5 Return 12 Union
6 Check Valve 13 Trap with Built-In Strainer
7 Vacuum Breaker (Optional)
TMB2014N
2
12
6
3
5
1
13
10
9
8
6
7
4
11
Steam Pressure PSI (bar) Minimum Pipe Diameter
Steam Trap Size*
(Pounds Condensate/Hour)
80 – 100 (5.3-6.9) 3/4 in. NPT 160
*Based on 100 psi.