HP Color LaserJet CP6015 Printer series - Manual (Page 116)

Choose an output location
Standard output bin
The product has a standard output bin for printed pages.
When you send print jobs to the product from a computer, the output is routed to the standard output
bin or to one of the output bins on the optional 3-bin stapler/stacker or booklet maker finisher.
Optional output accessories
An optional stapler/stacker or booklet maker can be installed with the product. When an accessory is
installed, an output accessory bridge is also added on top of the product in order to route the print jobs
to the accessory output bins.
3-bin stapler/stacker features
Table 7-6 3-bin stapler/stacker features
Job offset Each copy of a job is shifted to one side in the output bin in order to keep each copy separate
from the others. (Supported paper sizes: A3, A4, A4 rotated, A5, B4, B5, Ledger, Legal, Letter,
Letter rotated, Statement.)
Two operation modes Mailbox Mode assigns each bin to a user or group of users, and Stacker Mode uses all three
output bins for all print jobs — when one bin is full, jobs are routed to the next bin.
Stapler Built-in stapler staples jobs up to 50 sheets in size. Pages can be stapled in one position at
the front, in one position at the back, or at two positions at the side or top.
Large-capacity output bins The stacker has three bins: a 100-sheet bin, a 500-sheet bin, and a 1000-sheet bin.
Booklet maker finisher features
Table 7-7 Booklet-maker finisher features
Booklet-making The booklet-making feature staples and folds print jobs of 2 to 15 pages into a booklet.
102 Chapter 7 Paper and print media ENWW