HP Color LaserJet CP6015 Printer series - Manual (Page 213)

Control panel message Description Recommended action
USB STORAGE <X> NOT FUNCTIONAL
For help press (Help button)
A parameter in the USB storage is not
working correctly. 1. Turn product off.
2. Disconnect the USB storage accessory,
and replace with a new USB storage
accessory.
USB STORAGE <X> REMOVED
For help press (Help button)
A USB storage accessory has been
disconnected. 1. Turn product off.
2. Reconnect the USB storage accessory.
3. Turn product on.
USB STORAGE DEVICE FAILURE
To clear press (Checkmark button)
The specified device has failed. Press the checkmark button to clear.
USB STORAGE FILE SYSTEM IS FULL
To clear press (Checkmark button)
A PJL file system command could not store
something on the file system because the file
system was full. Press the help button to clear.
USB STORAGE IS WRITE PROTECTED
To clear press (Checkmark button)
The file system device is protected and no
new files can be written to it. Press the checkmark button to clear.
USB STORAGE] FILE OPERATION
FAILED
To clear press (Checkmark button)
A PJL file system command attempted to
perform an illogical operation. Press the checkmark button to clear.
Wait for printer to reinitialize This message can appear for a variety of
reasons: The RAM DISK settings changed
before the product has rebooted. The product
is auto power cycling after changing external
device modes. The user has exited
Diagnostics. A new formatter has been
installed with an old engine or a new engine
has been installed with an old formatter. No action is necessary.
WAITING FOR TRAY <XX> TO LIFT The specified tray is lifting paper for feeding. No action is necessary.
WARMING UP Product is coming out of powersave mode. No action is necessary.
Table 12-1 Control-panel messages (continued)
ENWW Control-panel messages 199