HP Color LaserJet CP6015 Printer series - Manual (Page 205)

Control panel message Description Recommended action
LOAD TRAY 1 [Type] [Size]
To continue press (Checkmark
button)
For help press (Help button)
Tray 1 is loaded and configured for a type and
size other than the one specified in the job. 1. If the correct paper is loaded, press the
checkmark button
.
2. Otherwise, remove the incorrect paper
and load Tray 1 with the specified paper.
3. If prompted, confirm the size and type of
paper loaded.
4. Confirm that the paper guides are in the
correct position.
5. To use another tray, remove paper from
Tray 1 and then press the checkmark
button
.
LOAD TRAY 1 [Type] [Size]
To use another tray press (Checkmark
button)
For help press (Help button)
This message appears when Tray 1 is
selected but is not loaded, and other paper
trays are available for use. 1. Load the correct paper in the tray.
2. If prompted, confirm the size and type of
paper loaded.
3. Otherwise, press the checkmark
button to select another tray.
Loading program <XX> Do not power off Programs and fonts can be stored on the
product’s file system and are loaded into
RAM when the product is turned on. The
number XX specifies a sequence number
indicating the current program being loaded. No action necessary. Do not turn the product
off.
MANUALLY FEED <TYPE> <SIZE>
For help press (Help button)
This message appears when Tray 1 is
selected but is not loaded, and other paper
trays are available for use. Load tray with requested paper. If paper is
already in tray, press the help button to exit
message and then press the checkmark
button
to print. To use another tray, clear
paper from Tray 1, press the help button to
exit message and then press the checkmark
button
.
MANUALLY FEED <TYPE> <SIZE>
To continue press
For help press (Help button)
This message appears when Tray 1 is
selected but is not loaded, and other paper
trays are available for use. Load tray with requested paper.
To override the message, press the
checkmark button
to use a type and size
of paper that is available in another tray.
MANUALLY FEED <TYPE> <SIZE>
To use another tray press (Checkmark
button)
For help press (Help button)
The specified job requires a manual feed. Load tray with requested paper. If paper is
already in tray, press the help button to exit
message and then press the checkmark
button
to print. To use another tray, clear
paper from Tray 1, press the help button to
exit message and then press the checkmark
button
.
MANUALLY FEED OUTPUT STACK
Then press (Checkmark button) to
print second sides
The product has printed the first side of a
manual duplex job and is waiting for the user
to insert the output stack to print the second
side. 1. Maintaining the same orientation,
remove document from the output bin.
2. Flip document printed side up.
3. Load document in Tray 1.
4. Press the (Checkmark button) to
print.
Moving solenoid
To exit press STOP
The solenoid is moving as part of a
component test. No action is necessary.
Table 12-1 Control-panel messages (continued)
ENWW Control-panel messages 191