HP Color LaserJet CP6015 Printer series - Manual (Page 34)

Configure device menu
The CONFIGURE DEVICE menu allows you to change the default printing settings, adjust the print
quality, change the system configuration and I/O options, and reset the default settings.
Printing menu
These settings affect only jobs without identified properties. Most jobs identify all of the properties and
override the values set from this menu.
To display: Press Menu , select CONFIGURE DEVICE, and then select PRINTING.
Menu item Values Description
COPIES Range: 1 - 32000 Allows you to set the default number of
copies for print jobs. The default number is
1.
DEFAULT PAPER SIZE A list of available sizes appears. Allows you to set the default paper size.
DEFAULT CUSTOM PAPER SIZE
● UNIT OF MEASURE
● X DIMENSION
● Y DIMENSION
Allows you to set the default size for any
custom print job. The default unit of
measure is MILLIMETERS.
OVERRIDE A4/LETTER NO
YES
Allows you to set the product to print an A4
job on letter-size paper when no A4 paper
is loaded. The default is YES.
MANUAL FEED OFF
ON
The default is OFF. Setting it to ON makes
MANUAL FEED the default for jobs that do
not select a tray. You can override this
setting in the printer driver.
COURIER FONT REGULAR
DARK
Allows you to select a version of the Courier
font. The default is REGULAR.
WIDE A4 NO
YES
Allows you to change the printable area of
A4 paper so that eighty 10-pitch characters
may be printed on a single line. The default
is NO.
PRINT PS ERRORS OFF
ON
Allows you to select to print PS error pages.
The default is OFF.
PRINT PDF ERRORS OFF
ON
Allows you to select to print PDF error
pages. The default is OFF.
PCL sub-menu
This menu configures settings for the printer control language.
To display: Press Menu , select CONFIGURE DEVICE, select PRINTING, and then select PCL
SUBMENU.
20 Chapter 2 Control panel ENWW