HP Color LaserJet CP6015 Printer series User Manual
Page 210
Control panel message
Description
Recommended action
Replace roller kit.
1.
Open the right door.
2.
Open the transfer access panel.
3.
Replace roller kit.
4.
Close the transfer access panel.
5.
Close the right door.
REPLACE ROLLER KIT
For help press (Help button)
To continue press
(Checkmark
button)
The REPLACE SUPPLIES menu is set to
STOP AT LOW. The roller kit is at end of life.
To continue printing without replacing the
roller kit, press the checkmark button
.
Replace roller kit.
1.
Open the right door.
2.
Open the transfer access panel.
3.
Replace roller kit.
4.
Close the transfer access panel.
5.
Close the right door.
REPLACE SUPPLIES
For status press
(Checkmark button).
Two or more supplies are out and need to be
replaced.
Press the checkmark button
to see which
supplies need to be replaced.
REPLACE SUPPLIES
To continue press
(Checkmark
button).
Pages remaining for at least two supplies
have reached the low threshold. The product
was set to stop printing when a supply needs
to be ordered.
Press the checkmark button
to continue
until the supply reaches the end of life.
REPLACE SUPPLIES - OVERRIDE IN USE The product is set to continue printing even
though a supply has reached end of life.
CAUTION:
Using the Override mode can
result in unsatisfactory print quality. HP
recommends replacing the supply when the
REPLACE SUPPLIES - OVERRIDE IN USE
message appears. The HP Supplies
Premium Protection Warranty coverage ends
when a supply is used in Override mode.
Press the down arrow to see step by step
information.
REPLACE SUPPLIES - Using black only
A color supply (or supplies) has reached the
out condition and the COLOR SUPPLY
OUT menu item is set to AUTOCONTINUE
BLACK .
No user input is required for printing to
continue. Printing continues in black. For
color printing, replace the needed color print
cartridge or drum.
REPLACE TRANSFER KIT
For help press (Help button)
The transfer kit has reached the end of life
Replace transfer kit.
1.
Open the right door.
2.
Open the transfer access panel.
3.
Push locks upward.
4.
Install transfer unit.
5.
Push locks downward.
Table 12-1
Control-panel messages (continued)
196 Chapter 12 Solve problems
ENWW