HP Color LaserJet CP6015 Printer series - Manual (Page 165)

Replace supplies
When you use genuine HP supplies, the product automatically notifies you when supplies are nearly
depleted. The notification to order supplies allows ample time to order new supplies before they need
to be replaced. For more information about ordering supplies, see
Supplies and accessories
on page 255
Locate supplies
Supplies are identified by their labeling and their blue plastic handles.
The following figure illustrates the location of each supply item.
Figure 11-1 Supply item locations
1
2
3
4
5
1 Print cartridges
2 Image drums
3 Fuser
4 Transfer unit
5 Transfer roller
Supply replacement guidelines
To facilitate the replacement of supplies, keep the following guidelines in mind when setting up the
product.
● Allow sufficient space in the front and on the right side of the product for removing supplies.
● The product should be located on a flat, sturdy surface.
For instructions on installing supplies, see the installation guides provided with each supply item or see
more information at
www.hp.com/go/cljcp6015_software . When you connect, select Solve a
Problem.
CAUTION: Hewlett-Packard recommends the use of genuine HP products in this product. Use of non-
HP products may cause problems requiring service that is not covered by the Hewlett-Packard extended
warranty or service agreements.
ENWW Replace supplies 151