HP Color LaserJet CP6015 Printer series - Manual (Page 44)

Item Sub-item Values Description
(duplexing). Two options are
available:
● AUTO enables Smart
Duplexing, which instructs
the device not to process both
sides if the second side is
blank. This can improve print
speed.
● YES disables Smart
Duplexing and forces the
duplexer to flip the sheet of
paper even if it is printed on
only one side. This might be
preferable for certain jobs that
use paper types such as
letterhead or prepunched
paper.
IMAGE ROTATION LEFT TO RIGHT
RIGHT TO LEFT
ALTERNATE
This option allows an image from
an optional output accessory to be
rotated 180 degrees, so that
staples can be placed in the upper
corner (usually narrow format
devices).
SLEEP DELAY 1 MINUTE
15 MINUTES
30 MINUTES
45 MINUTES
60 MINUTES
90 MINUTES
2 HOURS
4 HOURS
Reduces power consumption
when the product has been
inactive for the selected period.
The default is 60 MINUTES.
WAKE TIME <DAY OF THE WEEK> OFF
CUSTOM
Allows you to configure the daily
wake time for the product to avoid
warm-up or calibration time. Select
a day of the week and then select
CUSTOM. Set the wake time for
that day, and then choose whether
the wake time should be applied to
all days of the week.
OPTIMUM SPEED/ENERGY
USAGE FASTER FIRST PAGE
SAVE ENERGY
SAVE MOST ENERGY
Sets the fuser cooling behavior.
If FASTER FIRST PAGE is
selected, power to the fuser is not
turned off between jobs. This
causes no impact to the first-page-
out time.
If SAVE ENERGY is selected,
power to the fuser is turned off after
55 minutes of idle time. This
30 Chapter 2 Control panel ENWW