Changing user passwords – HP StorageWorks XP Remote Web Console Software User Manual
Page 101
7.
In the Account Information tree, select the user ID of the registered user account.
8.
Set the privileges for each role by selecting from their list.
9.
Set the operation privileges for each function in the Permission Information list if Enable is set
for the Storage Administrator role.
To set the operation privileges for each function:
a.
Select the row for which you want to set operation privileges. You can select multiple
rows by using the Shift key or Ctrl key.
b.
Select the operation privileges, either View or Modify, by right-clicking. The selected
privileges are displayed in the Permission column.
10. To register multiple user accounts at one time, repeat step 3 to step 9.
11. Click Apply to apply the settings to the storage system.
Figure 51 New User Dialog Box
Changing User Passwords
All users can change the passwords for their own user accounts. To change the user accounts of
others, log in with a user account with the Account Administrator role set to Modify.
For setting passwords, you can use all the alphanumeric characters and all the symbols (ASCII
codes). Passwords must be 6 to 256 characters.
To change the password for a user account:
1.
Log in to Remote Web Console, and open the Account window (see
).
2.
Change to Modify mode (see
“Changing Between View Mode and Modify Mode” (page 41)
).
3.
In the Account Information tree, open the folder to which the user account you want to change
the password is registered.
4.
In the Account Information tree, select the user ID of the user account for which you want to
change the password.
5.
Right-click, and then select the Change Password command. The Change Password dialog
box (
) is displayed.
6.
In the Change Password dialog box, enter the password as follows:
•
Current Password: Enter the current password. The current password is required when
Modify is not set for the Account Administrator role of your user account.
•
New Password: Enter the new password.
•
Re-enter New Password: Enter the new password again for confirmation.
7.
Click Set on the Change Password dialog box. The Change Password dialog box is closed,
and you return to the Account window.
8.
Click Apply to apply the settings to the storage system.
Managing the User Accounts
101