HP Color LaserJet 4600 Printer series - Manual (Page 152)

138 ENWW
FLASH FILE OPERATION
FAILED
alternates with
Ready For menus press
✔
The printer received a PJL file system
command that attempted to perform
an illogical operation (for example, to
download a file to a non-existent
directory). 1. Printing may continue.
2. Turn the printer off and
then back on.
3. If the message
reappears, there may
be a problem with the
software application.
FLASH FILE SYSTEM IS
FULL
alternates with
Ready For menus press
✔
The printer received a PJL file system
command that attempted to store
something on the file system but was
unsuccessful because the file system
is full. 1. Use HP Web Jetadmin
software to delete files
from the Flash Memory
and try again.
2. To remove this
message from the
display, turn the printer
off and then back on.
FLASH IS WRITE
PROTECTED
alternates with
Ready For menus press
✔
The file system device is protected
and no new files can be written to it. 1. To enable writing to the
Flash Memory, turn off
write protection, using
HP Web Jetadmin.
2. To remove this
message from the
display, turn the printer
off and then back on.
Genuine HP cartridge
installed A new HP cartridge has been
installed. The printer returns to the
READY state after approximately
10 seconds.
No action necessary.
Genuine HP supplies
installed A new HP cartridge has been
installed. The printer returns to the
READY state after approximately
10 seconds.
No action necessary.
INCORRECT <COLOR>
CARTRIDGE
alternates with
For status press
✔
An incorrect cartridge is installed in a
slot and the cover is closed. 1. Press ✔ and then press
V for help.
2. Press  and  to step
through the
instructions.
Incorrect PIN The wrong PIN was entered. Re-enter PIN correctly.
After three incorrect PIN
entries, the printer will
return to
READY .
Message Description Action