HP Color LaserJet 4600 Printer series - Manual (Page 53)

ENWW 39
9. Press ✔ to set the selection.
10. Press P AUSE /R ESUME .
Language
The option to set the default language appears when the printer is
first initialized. As you scroll through the available options, the list will
appear in the language that is highlighted. When the list appears in
the language desired, press
✔ to set the language. You may also
change the language at any time by following these steps:
To select language
1. Press ✔ to enter the MENUS .
2. Press  to highlight CONFIGURE DEVICE .
3. Press ✔ to select CONFIGURE DEVICE .
4. Press  to highlight SYSTEM SETUP .
5. Press ✔ to select SYSTEM SETUP .
6. Press  to highlight LANGUAGE .
7. Press ✔ to select LANGUAGE .
8. Press  or  to select the appropriate language.
9. Press ✔ to set the selection.
10. Press P AUSE /R ESUME .
To select language if the display is in a language you
do not understand
1. Press ✔ once.
2. Press  three times.
3. Press ✔ once.
4. Press  two times.
5. Press ✔ once.
6. Press  ten times.
7. Press ✔ .
8. Press  or  to select the appropriate language.
9. Press ✔ to set the selection.
10. Press P AUSE /R ESUME .