HP Color LaserJet 4600 Printer series - Manual (Page 41)

ENWW 27
System setup menu
The system setup menu allows you to make changes to general
printer configuration default settings such as PowerSave Time, printer
personality (language), and jam recovery.
See Changing printer control panel configuration settings for more
information.
Menu item Values Description
JOB STORAGE LIMIT 1-100 Sets the limit for the maximum number of
jobs stored on the hard disk at the printer.
JOB HELD TIMEOUT OFF
1 HOUR
4 HOURS
1 DAY
1 WEEK Sets the period of time that the system
keeps files in job storage before deleting
them from the queue.
COLOR/MONO MIX AUTO
MOSTLY COLOR PAGES
MOSTLY BLACK PAGES AUTO will reset the printer to the factory
default setting. MOSTLY COLOR PAGES
will exhibit the NEVER SWITCH behavior
to maximize performance. MOSTLY
BLACK PAGES will exhibit the LOOK
AHEAD FIRST behavior to improve cost
per page as much as possible while
minimizing impact to performance.
TRAY BEHAVIOR USE REQUESTED TRAY
MANUALLY FEED
PROMPT Allows you to specify settings for the tray
selection behavior. (This setting allows
you to configure the trays to behave like
trays in some previous HP printers.)
POWERSAVE TIME 1 MINUTE 15 MINUTES
30 MINUTES
1 HOUR
2 HOURS
4
HOURS
Reduces power consumption when the
printer has been inactive for an extended
period.
PERSONALITY AUTO
PCL
PS Sets the default personality to automatic
switching, PCL, or PostScript emulation.
CLEARABLE WARNINGS ON
JOB Sets whether a warning is cleared on the
control panel or when another job is sent.
AUTO CONTINUE ON
OFF Determines printer behavior when the
system generates an Auto Continuable
error.
SUPPLIES LOW CONTINUE
STOP Sets low supplies reporting options.
JAM RECOVERY AUTO
ON
OFF Sets whether the printer will attempt to
reprint pages after a jams.