HP Color LaserJet 4600 Printer series - Manual (Page 167)

ENWW 153
Wait for printer to
reinitialize RAM Disk settings have been
changed before the printer
automatically restarts, or external
device modes have changed. No action necessary.
Warming up The printer is coming out of
powersave mode. Printing will
continue as soon as warmup is
completed. No action necessary.
10.XX.YY SUPPLIES
ERROR
For help press
V
The printer cannot read or write to at
least one print cartridge memory tag
or at least one memory tag is
missing. 1. Turn the printer off and
then back on.
2. If the error persists,
contact HP Support.
3. Press V for more
information.
13.XX.YY JAM IN TOP
COVER AREA For help
press
V
There is a jam in the top cover area. 1. Press V for detailed
information about
clearing the jam.
2. Press  and  to step
through the
instructions.
3. If the message persists
after clearing all pages,
contact HP Support.
13.XX.YY JAM IN PAPER
PATH For help press
V
There is a jam in the media path. 1. Press V for detailed
information about
clearing the jam.
2. Press  and  to step
through the
instructions.
3. If the message persists
after clearing all pages,
contact HP Support.
13.XX.YY.DUPLEX JOB
INTERRUPTED For help
press
V
alternates with
13.XX.YY.DUPLEX JOB
INTERRUPTED Discard
top sheet and press
✔
or
13.XX.YY.DUPLEX JOB
INTERRUPTED Discard
top two sheets and
press
✔
A duplex job was interrupted by
interference as media passed
through the output bin during
duplexing. 1. Press V for more
information.
2. Remove one or two
pages from the output
bin as directed by the
display.
3. Press
✔
to continue
printing.
NOTE: If JAM RECOVERY
= OFF some pages will
not be reprinted. Re-send
the missing pages.
Message Description Action