HP Color LaserJet 4600 Printer series - Manual (Page 159)

ENWW 145
OUTPUT BIN FULL Remove
all paper from bin The output bin is full and must be
emptied for printing to continue. Remove media from the
output bin.
Paused To return to
ready press RESUME key The printer is paused, and there are
no error messages pending at the
display. The I/O continues receiving
data until memory is full. Press P AUSE /R ESUME .
Performing CALIBRATION The printer is calibrating. No action necessary.
Performing PAPER PATH
TEST ABCDEFGHIJKLMN
100000000000000 The printer is performing a Paper
Path Test. No action necessary.
Performing PRINT/STOP
TEST The printer is performing a Print/Stop
Test. No action necessary.
Performing SERVICE
TEST The printer is performing a SERVICE
TEST. No action necessary.
Performing upgrade A firmware upgrade is in process. No action necessary.
Please wait The printer is in the process of
clearing data. No action necessary.
Powersave on The printer is in the power save
mode. Any button press, an error
condition, or the receipt of printable
data may clear this message. No action necessary.
Printing...
CONFIGURATION The printer is generating the
configuration page. The printer will
return to the online
READY state when
the page is completed.
No action necessary.
Printing... DEMO The printer is generating the demo
page. The printer will return to the
online
READY state when the page is
completed.
No action necessary.
Printing... EVENT LOG The printer is generating the event
log page. The printer will return to the
online
READY state when the page is
completed.
No action necessary.
Printing... FILE
DIRECTORY The printer is generating the mass
storage directory page. The printer
will return to the
READY state when
the page is completed.
No action necessary.
Printing... FONT LIST The printer is generating either the
PCL or PS personality typeface list.
The printer will return to the
READY
state when the page is completed.
No action necessary.
Printing... MENU MAP The printer is generating the printer
menu map. The printer will return to
the
READY state when the page is
completed.
No action necessary.
Message Description Action