HP Color LaserJet 4600 Printer series - Manual (Page 154)

140 ENWW
INSTALL TRANSFER UNIT
For help press
V
The transfer unit is either not installed
or not correctly installed in the printer. 1. Insert the transfer unit
or make sure the
installed transfer unit is
fully seated.
2. Press V for detailed
information.
3. Press  and  to step
through the
instructions.
4. If the error persists,
contact HP Support.
LOAD TRAY XX: [TYPE]
[SIZE] For help press
V
alternates with
LOAD TRAY XX: [TYPE]
[SIZE] To use another
tray press
✔
Tray XX is either empty or configured
for a type and size other than
specified in the job. 1. Press V for detailed
information.
2. Press  and  to step
through instructions.
LOAD TRAY XX:[TYPE]
[SIZE] For help press
V
Tray XX is either empty or configured
for a type and size other than
specified in the job. No other tray is
available. 1. Press V for detailed
information.
2. Press  and  to step
through instructions.
Loading program XX Do
not power off Programs and fonts can be stored on
the printer’s file system and are
loaded into RAM when the printer is
turned on. The number XX specifies
a sequence number indicating the
current program being loaded. No action necessary.
Do not turn the printer off.
MANUALLY FEED [TYPE]
[SIZE] For help
press V
alternates with
MANUALLY FEED [TYPE]
[SIZE] To continue
press ✔
A job sent requires a specific paper
type and size that is not currently
available. 1. Press V for detailed
information.
2. Press  and  to step
through instructions.
Message Description Action