HP Color LaserJet 4600 Printer series - Manual (Page 165)

ENWW 151
TRAY XX OPEN For help
press
V
alternates with
Ready For menus press
✔
The specified tray is open or not
closed completely. Close the tray.
TRAY XX SIZE= <XXXX
SIZE> For help press
V
alternates with
TRAY XX SIZE= <XXXX
SIZE> To change, move
switch in tray XX
A non-detectable media size was
selected from the menu and the tray
switch is set to STANDARD.
The size selected from the menu
does not match the size detected by
the tray. Size detection occurs when
the tray switch is set in the
STANDARD position.
1. Adjust the side and rear
media guides against
the paper.
2. If the media used is
Letter, A4, Executive,
B5 JIS, A5, or Legal
sized, the tray switch
should be set to
STANDARD. Set the
tray switch to CUSTOM
for all other media sizes.
The tray switch must be
set before the size can
be selected from the
control panel.
3. Reset the paper size in
the paper handling
menu.
TRAY XX (TYPE) (SIZE)
Size detected by tray
alternates with
TRAY XX (TYPE) (SIZE)
To change type press
✔
The printer is reporting the current
configuration of tray XX. The tray
switch is in the STANDARD position. 1. To change media type,
press
✔
. Use

and

to highlight the type,
then press
✔ to select.
2. To change the media
size to Letter, A4,
Executive, B5 JIS, A5,
or Legal, leave the tray
switch in the
STANDARD position.
3. To change the media
size to other sizes,
move the tray switch to
CUSTOM, adjust the
paper guides against
the paper, and close the
tray.
4. Use  and  to
highlight the media size,
then press
✔ to select.
Message Description Action