HP Color LaserJet 4600 Printer series - Manual (Page 52)

38 ENWW
To set supplies low reporting
1. Press ✔ to enter the MENUS .
2. Press  to highlight CONFIGURE DEVICE .
3. Press ✔ to select CONFIGURE DEVICE .
4. Press  to highlight SYSTEM SETUP .
5. Press ✔ to select SYSTEM SETUP .
6. Press  to highlight SUPPLIES LOW .
7. Press ✔ to select SUPPLIES LOW .
8. Press  or  to select the appropriate setting.
9. Press ✔ to set the selection.
10. Press P AUSE /R ESUME .
Jam recovery
This option allows you to configure the printer response to paper
jams, including how it handles the pages involved.
AUTO is the default
value.
z
AUTO —the printer automatically turns jam recovery on when
sufficient memory is available.
z
ON —The printer reprints any page involved in a paper jam.
Additional memory is allocated to store the last few pages
printed, and this may cause overall printer performance to suffer.
z
OFF —The printer will not reprint any page that was involved in a
paper jam. Since no memory is used to store the most recent
pages, performance may be optimal.
To set jam recovery response
1. Press ✔ to enter the MENUS .
2. Press  to highlight CONFIGURE DEVICE .
3. Press ✔ to select CONFIGURE DEVICE .
4. Press  to highlight SYSTEM SETUP .
5. Press ✔ to select SYSTEM SETUP .
6. Press  to highlight JAM RECOVERY .
7. Press ✔ to select JAM RECOVERY .
8. Press  or  to select the appropriate setting.