Boonton PIM 31 User Manual - Manual (Page 102)

102
At this point the power levels and frequencies of the carrier signals must be set
before the RF output can be enabled. To do so, touch the drop down arrows
corresponding to each carrier to change their values. Alternatively, double
clicking on the field will display a virtual keyboard.
The PIM Analyzer’s input panel is as shown below:
(3) Saving History log files:
The PIM Analyzer software has an option to manually save the history log file.
Whilst taking a measurement, the user can select “Start History Save” and “Stop
History Save” under the “File” menu bar.