Boonton PIM 31 User Manual - Manual (Page 54)

54
Default: ON
7.4 Analyzer Mode
The Analyzer Mode of the PM 31 offers more possibilities to analyze PIM
measurements. It contains of 3 Sub modes:
• Frequency
• Time
• Sweep
The Analyzer mode is selected by pressing the Analyzer button
while in the Field Mode Screen. Returning to field mode is
possible by pressing the return button. RF Power needs to be
OFF
Frequency and power values can be set directly without utilizing Carrier or Site
information. For larger display we recommend to use an external monitor.
As in the Field Mode, the Analyzer Mode allows to log data over a period of time.
In this mode only the settings and measurement values are recorded. The
analyzer mode allows taking screenshots. This is helpful due to the graphic
display and measurement traces. Analyzing an image often reveals more details
than analyzing numeric values.
For more information on data logging and screen shots see chapter “Pull-Down
menus”.