Boonton PIM 31 User Manual - Manual (Page 27)

27
PIM 31 test systems provide not only accurate PIM analysis, they also allow
users to log data that is specific to a particular test setup or particular base
station site. At a later point, measurements can be recalled for comparison and to
analyze if the performance has changed. This particular information has to be
entered as well. The process is similar to the Carrier entry, except this time we
push the “Site” button. As with the carrier, the system lists all available Sites (or
Tests). Since we have not entered a Site the list is still empty.
Note: Site information is linked to particular Carriers. If a different Carrier
is selected the associated list of Sites (Tests) corresponds to Sites that
were entered under this Carrier.
Now we can enter detailed base station or measurement setup information. Once
completed, we return to the initial Field Mode Screen. The selected Site (Test)
information is now visible in the appropriate fields and the RF Button is now
active.