Boonton PIM 31 User Manual - Manual (Page 30)

30
Similar conditions apply when components are tested. The instrument settings do
not change, but for quality reasons every measurement has to be documented.
For measuring RF Components, the Field Mode is a very comfortable and
efficient
If more detailed information about the DUT is required, it can be accessed by
using the Analyzer Mode of the PIM31 test system. In this mode the user can
analyze multiple intermodulation products at the same time (Frequency Mode),
can record graphical traces over a longer time period (Time Mode) and can
frequency sweep DUTs (Sweep Mode) to ensure it performs within the complete
frequency band within specification.
The following chapters Field Mode and Analyzer Mode provide more detailed
information.