Boonton PIM 31 User Manual - Manual (Page 63)

63
8.1.2 Screen Capture / Print
This menu provides capabilities to capture a screen shot from any Graphical
Display of the Analyzer Mode. Capturing a screen shot requires manual trigger,
entering a file name, drive and directory. By default, the file name consists of
date and time, but can be modified by the user. The file is stored in jpeg format
by pressing the blue save button. The stored file has a size of about 150kB. In
addition to the graphic display and IM related information the screen capture
procedure allows the user to enter equipment information and a serial number for
the DUT.
Note: Only the graphic display and relevant information is stored with
the screen shot. Active measurements will be stopped during the
screen capture process.