Boonton PIM 31 User Manual - Manual (Page 55)

55
Element Name Description / Display
A Pull-Down menu Allows Screenshots, data logging, and self test. For
more information refer to chapter Pull-Down
menus.
B Carrier display Carrier signal information: Frequencies, Power
levels
C Graphical display Shows up to 4 IM signals as a vertical bar. Position
on the x-axis indicates frequency and length
indicates power level. Color of the bars refers to
the colors of the numeric displays (N-Q).
The graphical display is floating, meaning the
center area can be moved for better convenience
and visibility of important display information.
Moving by touching grid part of the display and the
screen and drawing it to the desired location
D Zoom Out Allows modification of the range from -60 to -200
dBc to -100 to 200dBc, which provides a better
resolution.
E Tx/Rx Shows internal communication activity to modules.
F RF Power Button Switches RF Power ON / OFF
The Button inscription shows what happens if the
button is pushed. In the shown screenshot RF
power is ON, the next button push will switch RF
power OFF.
G Return Brings PM 31 back to Field Mode. Works only
when RF Power is OFF
H Parameter Setting Allows modification of frequencies and power
levels used in Analyzer Time and Frequency mode.
Works only with RF Power OFF