Boonton PIM 31 User Manual - Manual (Page 68)

68
• Right click the “Local Area Connection” icon and open the properties
window.
• Select the “Internet Protocol (TCP/IP)” from the list and enter the IP
address in input field.
• Check “Use the following IP address”
• Enter IP Address: 192.168.0.10 (for example)
(The last number can be any number between 0 and 254 but should be
higher than that of the PC’s IP address)
• Subnet Mask:
255.255.255.0
• Press OK button when done
9.1.4 Connecting PIM31 and PC.
Connect the PIM31 unit to a PC with a regular LAN cable (not crossed type).
9.1.5 Setting IP Address of PC
• Go to “Control Panel”, find & open the “Network Connections” icon.
• Right click the “Local Area Connection” and open the properties window.
• Select the “Internet Protocol (TCP/IP)” from the list and enter the IP
address in input field.