Boonton PIM 31 User Manual - Manual (Page 15)

15
3.2 PIM 31 BACK PANEL
Number Element Description
1 Main Power supply AC Supply: 90-264V, 750W / 750VA
use 90 deg connector only
Fuse: 4A / 230V or 8A / 110V
2 Main Power Switch PIM31 contains protection circuitry to control
RF Power during operation and during
powering on/off cycles.
After switching Main Power Switch On wait 2
seconds before pushing Front Power Button.
Fans may Briefly run after power off.
Note: Do not use Main Power Switch while
system is in operation mode, vital files may
get corrupted Always use the Front Power
Button to power the system down.
3 VGA Port Allows using an external VGA Monitor
4 Communications port Factory use only
5 10 MHz Reference
out 10 MHz reference output to synchronize
external equipment
6 Air Flow Fan Always ensure sufficient air flow
7 Air Flow Fan Always ensure sufficient air flow