Boonton PIM 31 User Manual - Manual (Page 34)

34
and carriers)
For more information see chapter Data
Active only when RF-Power is OFF
7.2.2 Carrier Entry
Carrier Signal settings specify the frequencies of the transmitting RF signals and
their power level. Site information allows to a) specify the tested site in detail or
to specify component tests more closely. All settings entered with Carrier signals
or Site/Test information are recorded when measurement data is logged, this
allows for detailed analysis after a series of tests has been completed.
Furthermore settings and vital measurements are stored in the system so that
historical data related to site information can be viewed for comparison, e.g. if
systems are deteriorating. For more information on this see chapter “History
Screen”.
Carrier Select
Once carriers have been stored in the system, they can be easily recalled. The
screenshot shows a list of 2 carriers with related information on transmit
frequencies and power levels.