High Country Tek DVC80 - Manual (Page 169)

P/N: 021-00154, Rev. A.6 - updated for V4.7 Tools Page | 169
How can I program a variable voltage output?
We refer to this capability as a Dan Foss output. We ship DVC controllers with the necessary circuitry
preconfigured. Each output group can be configured as a Dan Foss type when you order the
unit. Should you wish to configure a Dan Foss output to normal PWM output you need to add a resistor and
capacitor.
DVC PWM Pin
+Supply ------1kohm resistor-----O-------4.7k resistor-----O Dan
Foss Output
| |
| .1 microfarad cap
| |
| Ground
PWM Cmd > |
|
.075 ohm
|
|
Ground