High Country Tek DVC80 - Manual (Page 92)

P/N: 021-00154, Rev. A.6 - updated for V4.7 Tools Page | 92
batteries and a moisture and oil proof keypad. Backlighting provides for easy reading of the display.
Programming the DVC62
Below is an example of how to program the DVC62. More complete
examples can be obtained from High Country Tek Tek upon request.
You basically program the display in four steps:
First add the DVC62 icon to your project.
Second construct the various display images you will want the user
to access (scroll through). The images are specified much like the DVC61 screens.
Third construct a logic sequence for the pendant code like
that shown. A bubble for each screen and a common key
input processing bubble is one way of organizing the
processing.
Finally, write the navigation and key entry code.
Programming the Key Keypad Entries