High Country Tek DVC80 - Manual (Page 65)

P/N: 021-00154, Rev. A.6 - updated for V4.7 Tools Page | 65
Next, double click on bubble 1 and enter
the variable initialization code shown
below.
Now, we will enter the code for bubble 2 and
the other bubbles in the logic sequence.
Double click on the bubble and enter the
program text and the optional Description field.
Next double click on the transition line connecting bubbles 2 and 3. Enter the transition conditions as shown.
Repeat this for the other transition lines. Enter the transition conditions shown in the “Logic1” logic sequence
window.
Note: Transition to 2 from 3 is whenever
the timer (Timer_0) counts down to 0
seconds. Every bubble returns to
bubble 2 in this manner to begin the
next counter incrementing sequence.
The transition to 3 is when the carry out